Topics Mobile Tech News Sunday, December 17

Headlines

Contact us


Site search:
complete archives list




Site Sponsors:


Don't forget AT&T and Verizon promo codes at Sidepon.com to save money.


NXP launches world's first USB-driven digital headset solution for mobile phones
Posted: 20-Aug-2007 [Source: NXP Semiconductors]

[NXP launches the Nexperia PNX0161 digital USB audio headset solution for mobile phones providing stereo playback and recording and FM radio.]

Eindehoven, Netherlands -- Building on its leadership in the USB transceiver market, NXP Semiconductors (NXP), the independent company founded by Philips, today launched a new solution to drive the standardization of USB 2.0 for portable consumer devices - the world's first USB-driven digital audio headset solution, Nexperia(TM) PNX0161.

The new solution from NXP leverages the USB 2.0 standard to shift the core audio streaming functions to the USB connector on the host device, alongside the existing battery charging and PC synchronization functions. This feeds the market trend for ultra-thin devices with a simplified design and a single standardized connection interface, enabling a marked reduction in bill-of-material costs and a quicker time to market.

According to In-Stat analyst, Brian O'Rourke, "By 2011, Hi-speed USB will dominate as the local interface on portable devices, feeding a market of 2.7 billion units at a CAGR of 24.4 percent."

"USB is fast emerging as a de facto connectivity interface in portable devices. NXP is leveraging its pole position to promote the adoption of USB technology with industry-first innovations, setting the stage for the future of USB applications for better connectivity and convenience on mobile phones, consumer electronics and PC peripherals," said Hans Fleurkens, product marketing manager, Mobile & Personal Business Unit, NXP Semiconductors. "Power consumption was the biggest challenge to the provision of digital audio on a headset, and NXP's PNX0161 is the first to address this most efficiently, while also offering a choice of functionality through a programmable core."

NXP's USB-driven digital audio headset solution, Nexperia PNX0161, has built-in DSP software, allowing OEMs to pre-set equalizers and maximize echo cancellation for improved sound quality. The programmable ARM7TDMI core is embedded with a DC/DC converter, which powers through the USB bus. Fully compliant with USB specifications, the solution offers plug-and-play operation with any USB host or On-The-Go (OTG) device and supports USB Audio and Human Interface Device (HID) classes.

In addition, foreseeing the emerging standardization of USB 2.0 in mobile devices, NXP also expands its applications for a compelling GSM/MP3 docking station reference design for maximum functionality such as mobile phone and MP3 player power charging, FM-radio enabled speakers and Bluetooth connection.

NXP's Nexperia PNX0161: World's first digital USB headset solution for mobile phones

The single-chip Nexperia PNX0161 is a small, ultra-low power Hi-speed USB 2.0-compliant solution that provides stereo playback and recording, as well as FM radio.

Available in a TFBGA88 package (7mm x 7mm), NXP's Nexperia PNX0161 requires very little power (approx. 10 mA at Vbus) for playback mode. Embedded power management functionality, alongside intelligent power control also contributes to this highly power-efficient solution. Especially designed to suppress noise coming from the host, the PNX0161 is available in two versions - programmable Flash or cost-effective ROM - that can be switched seamlessly during product ramp-ups.

A technical leaflet on NXP's Nexperia ultra-low power, single-chip USB audio solution, PNX0161, can be found at http://www.nxp.com/acrobat_download/literature/9397/75015981.pdf.

NXP's GSM/MP3 USB 2.0 docking station reference design

NXP's GSM/MP3 USB 2.0 docking station reference design is targeted at systems that bring together the functions of a GSM-based docking station for a mobile phone, an MP3-based docking station for a portable media player and a PC speaker. Measuring only 5mm x 5mm, the design is built around two ICs, the NXP SAA9870 and the NXP TDA8932BTW. The SAA9870 is a single-chip solution that integrates a powerful ARM7 core and a USB 2.0 codec with support for audio streaming and microphone functionality. The TDA8932BTW is a 2 x 15 W, high-efficiency, Class-D amplifier that delivers high-quality sound. Compared to conventional docking stations, which use ultra-low-efficiency speakers built into the laptop, PC monitor or mobile phone, this reference design provides distinctly superior sound and microphone performance.

A technical leaflet on NXP's GSM/MP3 USB 2.0 docking station reference design can be found at http://www.nxp.com/acrobat_download/literature/9397/75016038.pdf.

Availability

NXP's digital USB audio solutions are available now. NXP will be showcasing its USB solutions at its booth (Hall 1.1b, Booth 213) at IFA 2007 in Berlin, Germany from August 31 - September 05.

More...

Back to Headlines...

Apple Watch Apple Watch

iPhone 6 and iPhone 6 Plus iPhone 6 and iPhone 6 Plus

Amazon Fire Amazon Fire

Samsung Z - Tizen Samsung Z - Tizen

LG G3 LG G3

HTC One mini 2 HTC One mini 2

OnePlus One OnePlus One

HTC One (M8) HTC One (M8)

Samsung Gear 2 Tizen Watch Samsung Gear 2 Tizen Watch

HP VoiceTab HP VoiceTab

T200 octa-core T200 octa-core

Nokia 2520 Tablet Nokia 2520 Tablet

Samsung Galaxy Round Samsung Galaxy Round

BlackBerry Z30 BlackBerry Z30

iPhone 5S and iPhone 5C iPhone 5S and iPhone 5C

Samsung Galaxy Mega Samsung Galaxy Mega

Sony SmartWatch 2 Sony SmartWatch 2

iOS 7 iOS 7

Jolla Jolla

BlackBerry Z10 BlackBerry Z10

Galaxy S 4 Galaxy S 4

Galaxy Note 8.0 Galaxy Note 8.0

Ubuntu on Tablets Ubuntu on Tablets

LG Optimus G Pro L-04E LG Optimus G Pro L-04E

Firefox OS Firefox OS

Sony Zperia Z Sony Zperia Z



 

Valid HTML 4.1!

RSS © 1999-2017 Traques LLC
All times recorded in UTC
webmaster@MobileTechNews.com